Gencal.com >>
 
Main Navigation>>


Gen-Cal's ISO-9001 Certified Laboratory calibrates equipment in accordance with the original equipment manufacturer's (O. E. M.) specifications and requirements. We also comply with GIDEP (Government Industry Data Exchange Program) specifications and requirements.
.>> Quality Policy

General Calibration, Inc. is striving to be the preferred metrology service for gage and test equipment calibration.

General Calibration, Inc. is committed to good professional practice and to the quality of our calibration services. We are committed to providing a superior standard of service to our customers.

Quality and continuous improvement are our basic operating principles. Quality objectives and goals for continuous improvements are established and strived for. The overall objective of the quality system is to fully understand all the requirements of our customers and to consistently meet or exceed those requirements.

Quality is the responsibility of every General Calibration, Inc. employee. Employees are required to familiarize themselves with the quality documentation and implement all policies and procedures in their work to the best of their abilities.

General Calibration, Inc. is committed to full compliance to all requirements of the ISO/IEC 9001 - 2000.

Otto Revak
President

>> Equipment Serviced

General Calibration services the following type of equipment:

Power Supples
Oscilloscopes
Digital Multimeters
Micrometers
Pressure gauges
Thermometers
Calipers
Tourque Wrenches
Frequency Counters
Signal Generators
Scales
Spectrum Analyzers
Chart Recorders
Function Generators
Power Sensors
Force Gauges
Hipot Testers
Temperature Chambers
Attenuators
Electronic Loads
Power Meters
Decade Resistors
Tachometers
Network Analyzers
Logic Analyzers
Calibrators
Amplifiers
Pulse Generators
LCR Meters
Standard Capacitators
Current Probes
Mehohmmeters
Tourque Screwdrivers
Height Gauges
Stopwatches
Wrist Strap Testers
Current Transformers
Ammeters
Infrared Thermometers
.>> NQA - National Quality Assurance Certificate

General Calibration, Inc.'s laboratory has been Certified to ISO-9001 by National Quality Assurance.

To download a copy of Gen-Cal's ISO Certificates in PDF format CLICK-HERE for ISO 9000 or CLICK-HERE for ISO/IEC 17025 This file is approx. 600 KB and may be viewed or printed using Adobe's Acrobat Reader. Acrobat Reader may be downloaded free of charge from Adobe's Web-Site

..>> Conformance

Test Equipment is repaired and calibrated using the following reference guidelines:

N.I.S.T. - National Institute of Standards and Technology
ISO/IEC 17025:2005
ISO 9001 - 2000
ISO 10012-1-1992
ANSI/NCSL Z540-1-1994
10CFR PART 21

Affiliations with Metrology organization:

National Conference of Standards Labratories (NCSL) - Member since 1992
Govervment Industry Data Exchange Program (GIDEP) - Member since 1997

..>> Method of Calibration

-
Calibration Certification traceable to the National institute of Standards and Technology.
-
Turn-around of 5 working days on equipment that requires calibration only.
-
Pick-up and delivery of your equipment at your facility.
-
Automatic recall of your equipment that is due for calibration. This service needs to be requested. Recall will be on a monthly basis and is FREE of charge.
-
Calibration Stickers affixed to each instrument that has been calibrated.
-
Choice of data-sheets for all calibrations: data-sheets that show all calibrations in "as-found data" and "as-left data" format or data-sheets that only show out-of-tolerance conditions in "as-found data" and "as-left data" format.
-
Preventive maintenance: i.e., cleaning of switches and filters and internal and external cleaning of instruments.
-
On-site calibration is available on request

 

..>> On-Site Calibration Service

General Calibration, Inc. can provide service at your facility

In order to provide on-site calibration services, we require the following:
1. 35-40 day Advanced notification
2. An equipment list of the items that require calibration, please e-mail list to orevak@gencal.com

We will provide you with a quote and available dates to perform calibrations

 

Pickup and Delivery

 

.....

....> Access to DataView
....> Feedback Form Fax
....> Feedback E-Mail

 

....> Packing Slip (PDF)
....> References
....> Manufacturer List

 

..ISO 9001 Certified
..ISO/IEC 17025 Certified
..Accepts Visa, MC & AMEX

 
Copyright 2006 General Calibration© Designed by Future Convergence